TM 9-2320-273-20
AUXILIARY AIR-POWERED COMPONENT SYSTEMS.
9-40. WINDSHIELD WASHER MAINTENANCE (Continued).
LOCATION/lTEM
ACTION
REMARKS
3. Reservoir (6).
4. Two small hoses (2),
T-connection (1), and
water line (8).
5. Reservoir (6).
6. Air line (5) and
waterline (8).
7. Two small hoses (2).
Lift out of bracket (7).
Inspect for:
a. Leaks.
b. Cracks.
Set into bracket (7).
Connect to reservoir (6).
Connect to wiper pivot
assemblies (4).
8. INSTRUMENT PANEL/
Washer button.
Push. Check that washer
fluid is squirted onto wind-
shield. Adjust nozzles (3)
if necessary. Check for leaks.
Replace if necessary.
Reconnect heater duct.
If air pressure is low, you
may need to start engine
before washers will work.
9-180
