TM 9-2320-273-20
BRAKE SYSTEM.
9-33. REAR BRAKE SHOES MAINTENANCE (M915) (Continued).
LOCATION/lTEM
ACTION
REMARKS
B. INSPECTION (Continued). ‘
10. Camshafts (28) and (29),
Remove by tapping gently
two washers (10), and
from rear.
washer (27).
11. Bracket assemblies (4)
Remove by unscrewing
and (5) and gasket (1).
four capscrews (3) with
four Iockwashers (2).
12. Bearing (8) and seal (9).
Remove from brackets (6)
and (7).
13. Two bushings (18), seal
Remove from spider (19).
(16), and bearing (17).
14. Four capscrews (31) and
Remove from spider (19).
Remove only if damaged or
dust shield (32).
replacing spider.
C. INSTALLATION.
15. Two bushings (18), seal
Push into spider (19).
(16), and bearing (17).
16, Bearing (8) and seal (9).
Insert into brackets (6)
and (7),
17. Bracket assemblies (4) and
Install and secure with
and (5) and gasket (1).
four capscrews (3) and
Iockwashers (2).
18. Camshafts (28) and (29)
Install through bearings
and washer (27).
(17) and (8).
19. Two shoe assemblies (20)
a. Install to spider (19)
and two anchor pins (13).
thru two bushings (18).
b. Tighten lock screw (15)
and install new lock wire.
9-138
