TM 9-2320-273-20
BRAKE SYSTEM.
9-31. FRONT BRAKE SHOES MAINTENANCE (M915) (Continued).
LOCATION/lTEM
ACTION
REMARKS
1. Two brake springs (2).
Remove with brake spring
Place notched tip of pliers
pliers.
against hood on spring, un-
notched tip against inner
ridge of brake shoe (1), squeez-
ing pliers to stretch spring and
remove it from the notch.
2. Two brake shoes (1).
Remove from clip (18) and
lift off shoes.
3. Two clips (18), two nuts
Loosen nut (19) and remove
Remove only if damaged or
(19), two Iockwashers (20),
capscrew (21), Iockwasher
broken.
and two capscrews (21).
(20) and clip (18).
4. Two anchor guides (6) and
Remove.
Remove only if service on
two Iockwashers (7).
actuator is needed.
5. Capscrew (12), Iockwasher
Remove.
Remove only if service on
(11), spring (10), and pawl
actuator is needed.
(9).
6. Two seal assemblies (4),
Remove.
Clean, inspect, and replace
plunger (5), two plungers
(13), two actuators (14),
as necessary.
two seal assemblies (15),
and two adjusting bolts (16).
7. Two wedges (8).
Remove and clean.
Replace if damaged.
8. Dust shield (22), four
Unscrew capscrews (23).
Remove only if replacement
capscrews (23), and four
is needed,
washers (24).
9. Two brake springs (2), brake
Inspect for:
Clean and replace as necessary.
shoes (1), seal assemblies (4)
a. Dirt.
and (15) and all hardware.
b. Wear.
c. Damage.
9-120
