TM 5-2330-325-13&P
0042
INSPECTION INSTRUCTIONS - Continued
WARNING
Solvent cleaning compound MIL-PRF-680 Type II and Type III. May be irritating to
the eyes and skin. Use protective gloves and eye protection. First aid for skin
contact: remove contaminated clothing. Wash skin thoroughly with soap and water.
First aid for eye contact: flush with water for 15 minutes or until irritation subsides.
If symptoms persist, seek medical attention. First aid eye contact: flush with water
for 15 minutes or until irritation subsides. Failure to comply may result in death or
injury to personnel. Seek medical attention in the event of an injury.
Solvent cleaning compound MIL-PRF-680 Type II and Type III. Use in a well-
ventilated area. Use respirator as needed. Accidental ingestion can cause irritation
of digestive tract and respiratory tract. May cause lung and central nervous system
damage. Can be fatal if swallowed. Inhalation of high/massive concentrations can
cause coma or be fatal. First aid for ingestion: do not induce vomiting. Seek
immediate medical attention. First aid for inhalation: move to fresh air. If not
breathing, provide artificial respiration. If symptoms persist, seek medical attention.
Failure to comply may result in death or injury to personnel. Seek medical attention
in the event of an injury.
Solvent cleaning compound MIL-PRF-680 is combustible; DO NOT use or store
near heat, sparks, flame, or other ignition sources. Use mechanical ventilation
whenever product is used in a confined space, heated above ambient
temperatures, or agitated. Keep container sealed when not in use. The flashpoint
for Type II solvent cleaning compound is 141-198F (61-92C) and Type III is
200-240F (93-116C). Fire extinguishers should be placed nearby when using
solvent cleaning compound. Failure to comply may result in death or injury to
personnel. Seek medical attention in the event of an injury.
Accidental or intentional introduction of liquid contaminants into the environment is
a violation of state, federal, and military regulations. Refer to Army Petroleum, Oils
and Lubricants (POL) for information concerning storage, use, and disposal of
these liquids. Use a drain pan or appropriate containment equipment to capture
any draining or leaking fluid. Refer to local procedures and plans for preventing
and responding to fluid spills or leaks. Comply with local regulations when
disposing of clean up material and leaked and spilled fluids. Failure to comply may
cause damage to environment and health of personnel. Failure to comply may
result in death or injury to personnel. Seek medical attention in the event of
an injury.
0042-2
02/13/2013root(surwp)wpno(M1010)
