TB 9-2320-360-13&P-1
A/C COOLANT HOSE REPLACEMENT - CONTINUED
0033 00
INSTALLATION
WAR N I N G
Ensure hoses do not kink or rest on hot surfaces. Failure to follow this warning may cause damage to equip-
ment.
N OT E
Cut hoses to size as required.
Adjust cushion clamp as required for proper hose routing.
1.
Position engine coolant hose (15) from back of engine (21) around frame (25) and to top of radiator (20).
2.
Install cushion clamp (24) on engine coolant hose (15) and frame (25) with screw (23) and new locknut (22).
WAR N I N G
Adhesives and sealing compounds can burn easily, can give off harmful vapors and are harmful to skin and
clothing. To avoid injury or death, keep away from open fire and use in well-ventilated areas. If adhesive or
sealing compound gets on skin or clothing, wash immediately with soap and water.
3.
Apply sealing compound to straight adapter (16) and fitting (12).
4.
Install straight adapter (16) and fitting (12) on engine (21).
5.
Install engine coolant hose (15) on straight adapter (16) of oil cooler connection (17) with hose clamp (14).
6.
Install engine coolant hose (15) on fitting (19) at center of radiator (20) with hose clamp (18).
7.
Position two coolant hoses (3 and 4) on fittings (12 and 13).
8.
Install two hose clamps (10 and 11) on coolant hoses (3 and 4).
9.
Install two coolant hoses (3 and 4) on filter fittings (5 and 6).
10.
Install two cushion clamps (9) on hoses (3 and 4) with screw (8) and new locknut (7).
11.
Install two hose clamps (1 and 2) on coolant hoses (3 and 4).
12.
Fill cooling system (TM 9-2320-360-20-2).
13.
Install right fender (TM 9-2320-360-20-2).
14.
Close hood (TM 9-2320-360-10).
15.
Remove wheel chocks (TM 9-2320-360-10).
END OF WORK PACKAGE
0033 00-3/(0033 00-4 Blank)
