TB 9-2320-360-13&P-1
WARN I N G
Jewelry can catch on equipment and cause injury or short across electrical circuit and cause severe
burns or electrical shock. Remove rings, bracelets, watches, necklaces, and any other jewelry
before working around HET Tractor.
VISUAL INSPECTION
(1) Inspect A/C compressor belt for
cracking, fraying, and breaks.
(a) If A/C compressor belt is cracked,
frayed, or broken, replace belt
(WP 0037 00). Verify repair, go to
Step 4 of this fault.
(2) Check A/C compressor belt for proper
tension (WP 0037 00).
(a) If A/C compressor belt is loose,
tighten to correct tension (WP
0037 00). Verify repair, go to Step
4 of this fault.
(3) Go to Step 3 of this fault.
VISUAL INSPECTION
(1) Inspect A/C compressor mounting
brackets for damage and missing or
loose hardware.
(a) If A/C compressor mounting
brackets are damaged or hardware
is missing or loose, perform the
following:
1 Remove A/C compressor
subsystem (WP 0034 00).
2 Replace damaged or missing
A/C compressor mounting
hardware. Tighten loose
mounting hardware as
required.
3 Install A/C compressor
subsystem (WP 0034 00).
HETF00452
4 Verify repair, go to Step 4 of
this fault.
(b) If A/C compressor or mounting
bracket hardware is secure and
free from damage, notify DS
Maintenance.
0018 00-5