TB 9-2320-302-13&P-2
4.) Insert glass in frame holder.
1.) Loosen and remove 1/4-20 bolts from
window frame
* Note: 001 is driver side and 002 is
passenger side
2.) Insert driver and passenger side
frames with 1/4-20X1 bolt, flat washer
and lock washer on outer holes and
center holes require 1/4-20 X 1 3/4
bolts (center holes will need to be
drilled).
3.) Insert frame holder (driver and passenger).
5.) Bolt outside frame to glass.
6.) Tighten washers and blots ONLY on
the bottom three bolts leave the top
three for later installation.
ArmorWorks
0038 00-51