TB 9-2320-279-13&P
0040
Harness Removal Model B (A2 vehicles)
1.
Battery disconnect switch to OFF position.
2.
Remove 6 screws, cover, and gasket from control junction box.
3.
Loosen two screws, white wire with green tape from side conduit, and red and blue wire from side
conduit, from lower half of terminal board. Shown with other wires removed for clarity.
4.
Loosen compression nut. Remove cable, wires, rubber seal, plastic washer, and compression nut from
control junction box.
0040-124