TB 9-2320-279-13&P-3
0026
INSTALLATION
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use
assistance during procedure. Ensure that any lifting device used is in good condition and of
suitable load capacity. Keep clear of heavy parts supported only by lifting device. Failure to
follow this warning may cause injury or death to personnel.
NOTE
Both left wheel well assembly and right wheel well assembly are installed the same way.
Left wheel well shown.
Wheel well assembly weighs 80 lb (36 kg).
1. With the aid of assistant, position wheel well assembly (4) between bottom of pump module (15) and
mudflap bracket (14).
2. Secure wheel well assembly (4) to mudflap bracket (14) with three locknuts (13), washers (12), large
washers (11), and screws (10). Do not tighten screws at this time
3. Position front side of wheel well assembly (4) to front panel assembly (9).
0026-4