• Home
  • Download PDF
  • Order CD-ROM
  • Order in Print
RIGHT UPPER SIDE PANEL ASSEMBLY REPAIR - Continued
RIGHT UPPER SIDE PANEL ASSEMBLY REPAIR - Continued

Hemtt Tanker Armor Module Kit 5Sk319 Kit, Armor, Tan 5Sk320 Kit, Armor, Green Page Navigation
  67    68    69    70    71  72  73    74    75    76    77  
img
TB 9-2320-279-13&P-3
0019
INSTALLATION
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use
assistance during procedure. Ensure that any lifting device used is in good condition and of
suitable load capacity. Keep clear of heavy parts supported only by lifting device. Failure to
follow this warning may cause injury or death to personnel.
NOTE
Right upper side panel assembly weighs 170 lbs (77 kg).
1. Attach sling and lifting device to right upper side panel assembly (4).
2. Using lifting device, position right upper side panel assembly (4) on right lower side panel assembly (9)
and rear panel assembly (5).
3. Install right upper side panel assembly (4) to right lower side panel assembly (9) with four washers (8),
lockwashers (7), and screws (6). Do not tighten screws at this time.
4. Install five washers (3), lockwashers (2), and screws (1) to right upper side panel assembly (4) and rear
panel assembly (5). Do not tighten screws at this time.
5. Tighten four screws (6) to 60 lb-ft. (81 Nm)
6. Tighten five screws (1) to 60 lb-ft. (81 Nm).
END OF TASK
0019-5


Privacy Statement
Press Release
Contact

© Copyright Integrated Publishing, Inc.. All Rights Reserved.