• Home
  • Download PDF
  • Order CD-ROM
  • Order in Print
LEFT UPPER SIDE PANEL ASSEMBLY REPAIR - Continued
LEFT UPPER SIDE PANEL ASSEMBLY REPAIR - Continued

Hemtt Tanker Armor Module Kit 5Sk319 Kit, Armor, Tan 5Sk320 Kit, Armor, Green Page Navigation
  61    62    63    64    65  66  67    68    69    70    71  
img
TB 9-2320-279-13&P-3
0018
INSTALLATION
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use
assistance during procedure. Ensure that any lifting device used is in good condition and of
suitable load capacity. Keep clear of heavy parts supported only by lifting device. Failure to
follow this warning may cause injury or death to personnel.
NOTE
Left upper side panel assembly weighs 165 lbs (75 kg).
1. Attach sling and lifting device to left upper side panel assembly (4).
2. Using lifting device, position left upper side panel assembly (4) on left lower side panel assembly (9) and
rear panel assembly (5).
3. Install left upper side panel assembly (4) to left lower side panel assembly (9) with four washers (8),
lockwashers (7) and screws (6). Do not tighten screws at this time.
4. Install washer (3), lockwasher (2), and screw (1) to left upper side panel assembly (4) and rear panel
assembly (5). Do not tighten screws at this time.
5. Tighten screw (1) to 60 lb-ft. (81 Nm).
6. Tighten four screws (6) to 60 lb-ft. (81 Nm).
END OF TASK
0018-5


Privacy Statement
Press Release
Contact

© Copyright Integrated Publishing, Inc.. All Rights Reserved.