W A R N I N G
Brake housing is under approximately 2,500 lb (1134 kg) of spring pressure.
Loosen screws evenly until pressure is relieved to prevent possible injury to
Be careful if winch is jammed and cable is installed. Winch drum will free
wheel and unwind cable, which could cause injury to personnel.
Make sure wire rope is not on winch drum.
LOOSEN SIX SCREWS (1) EVENLY UNTIL PRESSURE IS RELIEVED.
REMOVE SIX SCREWS (1), SIX LOCK WASHERS (2), AND BRAKE HOUSING (3). DISCARD LOCK
REMOVE EXTENSION SHAFT (4), TWO DOWELS (5), SHAFT (6), BEARING (7), PACKING (8), AND
PISTON ASSEMBLY (9). DISCARD PACKING.