CRANKSHAFT REPLACEMENT (CONT)
Make sure thrust washers are not dislodged when positioning crankshaft.
Failure to do so could result in damage to equipment.
Make sure all crankshaft main bearing journals are clean.
Keyway on crankshaft goes to front of engine block.
COAT MAIN BEARING JOURNALS AND UPPER MAIN BEARING SHELLS WITH CLEAN ENGINE
LUBRICATING OIL. USING NYLON ROPE AND SUITABLE LIFTING DEVICE, POSITION
CRANKSHAFT (5) IN CYLINDER BLOCK (4) ON UPPER MAIN BEARING SHELLS.
REMOVE NYLON ROPE.