Section II. REAR-REAR AXLE DIFFERENTIAL CARRIER REPAIR
This section illustrates and describes procedures for disassembly, cleaning, inspection, repair, and
assembly of the rear-rear axle differential carrier.
Repair of the rear-rear axle differential carrier is general support maintenance.
REAR-REAR AXLE DIFFERENTIAL CARRIER REPAIR
This task covers:
c. Inspection d. Repair
Tools and Special Equipment:
Shop Equipment, SC 4910-95-CL-A31
Tool Kit, SC 5180-90-CL-N05
Yoke Holder Bar, J-3453
(All except M915A2)
Seal, Oil (M915A2)
Assembly (All except
Appendix B, Item 40
Appendix B, Item 32
Appendix B, Item 5
Dye, Prussian Blue
Appendix B, Item 17
Appendix B, Item 26
and Artillery (GAA)
Wire, 14 Gauge
Appendix C, Item 66
Personnel Required: (2)
General Safety Instructions:
l Rear-rear axle differential carrier weighs
860 lb (390 kg). Attach suitable floor jack
prior to disassembly or assembly to
prevent possible injury to personnel.
l Adhesives, solvents, and sealing
compounds can burn easily, can give off
harmful vapors, and are harmful to skin
and clothing. To avoid injury or death,
keep away from open fire and use in well-
ventilated area. If adhesive, solvent, or
sealing compound gets on skin or clothing,
wash immediately with soap and water.
l Ring gear is heavy and can injure
personnel if dropped. Do not put hands
under ring gear.