FORWARD-REAR AXLE DIFFERENTIAL CARRIER REPAIR (CONT)
42. INSTALL TWO BEARING CONES (18).
Adhesives, solvents, and sealing compounds can burn easily, can give off
harmful vapors, and are harmful to skin and clothing. To avoid injury or
death, keep away from open fire and use in well-ventilated area. If adhesive,
solvent, or sealing compound gets on skin or clothing, wash immediately with
soap and water.
Make sure all old adhesive has been removed from differential carrier and
bearing caps to prevent damage to equipment.
43. SET TWO BEARING CAPS (19 AND 20) ON DIFFERENTIAL CARRIER (3) AND APPLY
CONTINUOUS BEAD OF ROCKWELL ADHESIVE AROUND ENTIRE SMOOTH GROUND SURFACES
ON BOTH SIDES. DO NOT APPLY ADHESIVE TO THREADED AREAS.