CENTER SHAFT REPAIR (CONT)
W A R N I N G
Adhesives, solvents, and sealing compounds can burn easily, can give off
harmful vapors, and are harmful to skin and clothing. To avoid injury or
death, keep away from open fire and use in well-ventilated area. If adhesive,
solvent, or sealing compound gets on skin or clothing, wash immediately with
soap and water.
APPLY SEALING COMPOUND TO HOLES IN RETAINER WASHER (5) AND TWO SCREWS (6).
INSTALL RETAINER WASHER (5) AND TWO SCREWS (6). TIGHTEN SCREWS TO 40 LB-FT (54 N.m).
TURN CENTER SHAFT (1) OVER AND INSTALL SPACER (7).
PRESS SMALL GEAR (8) ON CENTER SHAFT (1) AND INSTALL SPACER (9).
INSTALL BEARING CONE (10) TO SEAT AGAINST SPACER (9).
10. COAT BEARING CONE (10) WITH GAA.
Install center shaft in transfer case (page 15-2).