TM 9-2320-363-34-2
21.
22.
AND
INSTALL SPEEDOMETER
SHAFT (18).
DRIVE GEAR (21), SPACER (22),
INSTALL OUTPUT SHAFT (18) IN REAR COVER (8).
BEARING (23) ON OUTPUT
23.
USING YOKE HOLDER BAR AND SOCKET, INSTALL RETAINING RING
(24), YOKE (25), AND NUT (26).
24.
W A R N I N G
Adhesives, solvents, and sealing compounds can burn easily, can give off
harmful vapors, and are harmful to skin and clothing. To avoid injury or
death, keep away from open fire and use in well-ventilated area. If adhesive,
solvent, or sealing compound gets on skin or clothing, wash immediately with
soap and water.
LIGHTLY COAT THREADS OF TWO PLUGS (27) AND PLUG (28) WITH PIPE SEALING COMPOUND
AND INSTALL IN REAR COVER (8).
14-143