TM 9-2320-363-34-1
REAR WINDOW REPLACEMENT (CONT)
W A R N I N G
Wear protective gloves when handling glass, Failure to do so could result in
injury to personnel.
C A U T I ON
When handling rear window glass, be careful not to nick or splinter edges.
Chipped edges could cause cracking later.
Do not use sealant around rear window glass. Sealing compounds are not
needed and, if applied unevenly, can cause leaks resulting in water damage.
NOTE
If installing rear window glass only, perform steps 1 thru 4. If installing rear
window glass and seal, perform steps 5 thru 7.
1.
LUBRICATE REAR WINDOW CHANNEL OF RUBBER EXTRUSION (1) WITH SOAP AND WATER
SOLUTION.
2.
SLIDE REAR WINDOW GLASS (2) INTO WINDOW CHANNEL OF RUBBER EXTRUSION (1) AS FAR
AS IT WILL GO WITHOUT FORCING.
3.
USING WINDSHIELD PICK, ALTERNATE BETWEEN TOP AND BOTTOM OF REAR WINDOW
GLASS (2) AND WORK RUBBER EXTRUSION (1) OVER EDGE OF REAR WINDOW GLASS (2).
10-86