TM 9-2320-363-34-1
N O T E
Procedure is the same for both sides and both ends of equalizing beam
1.
USING SUITABLE LIFTING DEVICE AND JACK STANDS, LIFT AND SUPPORT REAR OF
VEHICLE SO THAT WEIGHT IS RELIEVED FROM BOTH REAR SPRINGS
2.
REMOVE TWO AIR HOSES (1) FROM REAR BRAKE (2).
N O T E
Spider assembly consists of air brake chamber, S-cam, and slack adjuster.
3.
REMOVE 16 NUTS (3), 16 WASHERS (4), 16 SCREWS (5), 16 WASHERS (6), AND SPIDER
ASSEMBLY (7) FROM REAR AXLE (8).
C A U T I O N
Place jack stand on nonbearing surface of axle. Failure to do so could result in
damage to axle bearing surface.
4.
USING SUITABLE JACK STAND, SUPPORT REAR AXLE (8).
Change 1
9-29