TM 9-2320-363-34-1
FRONT DIFFERENTIAL CARRIER REPLACEMENT (CONT)
Use general cleaning methods to clean all parts (page 2-30).
Inspect all parts for wear or damage.
W A R N I NG
Front differential carrier weighs 820 lb (372 kg). Attach suitable floor jack
prior to installation to prevent possible injury to personnel.
Spilled gear oil is very slippery. Wipe up any spilled oil immediately. Failure
to do so could result in serious injury to personnel.
1.
ATTACH SUITABLE FLOOR JACK TO DIFFERENTIAL CARRIER (1).
W A R N I N G
Adhesives, solvents, and sealant compounds can burn easily, can give off
harmful vapors, and are harmful to skin and clothing. To avoid injury or
death, keep away from open fire and use in well-ventilated area. If adhesive,
solvent, or sealant compound gets on skin or clothing, wash immediately with
soap and water,
2.
APPLY SILICONE ADHESIVE-SEALANT TO AXLE HOUSING (2)
3.
INSTALL DIFFERENTIAL CARRIER (1) IN AXLE HOUSING (2).
IN PATTERN SHOWN.
5-36