TM 9-2320-363-34-1
AIR SHlFT CHAMBER REPLACEMENT (CONT)
Use general cleaning methods to clean all parts (page 2-30).
Inspect all parts for wear or damage.
1.
INSTALL NEW SEAL (1) AND PILOT RING (2) IN AIR SHIFT CHAMBER (3).
W A R N I NG
Adhesives, solvents, and sealing compounds can burn easily, can give off
harmful vapors, and are harmful to skin and clothing. To avoid injury or
death, keep away from open fire and use in well-ventilated area. If adhesive,
solvent, or sealing compound gets on skin or clothing, wash immediately with
soap and water.
2.
COAT BOTH SIDES OF NEW GASKET (4) WITH SILICONE ADHESIVE-SEALANT AND INSTALL ON
AIR SHIFT CHAMBER (3).
3-272