TM 9-2320-363-34-1
Table 2-1. Troubleshooting (Cont)
Malfunction
Test or Inspection
Corrective Action
TRANSMISSION (CONT)
4. OIL LEAKING AT CONVERTER HOUSING.
Remove cover from top of converter housing (page 14-7). Check for signs of oil.
is inside housing, replace rear engine crankshaft
If engine oil
oil seaI (pages 3-141, 3-145).
If transmission oil is inside housing, inspect inner converter
housing mounting screws, converter pump to converter housing
seal ring, converter housing gasket, torque converter cover seal
ring, oil pump seal, pitot attachment screws, pump hub seal
rings, and converter pump hub.
5. EXCESSIVE CREEP IN FIRST AND REVERSE.
Step 1. Check for too high engine speed.
If idle is more than 600 rpm, adjust engine idle speed
(TM 9-2320-363-20).
2-13