T R A N S M I S S I O N R E P L A C E M E N T ( C O N T )
W A R N I N G
Transmission weighs 900 lb (409 kg). Support transmission with transmission
jack during installation to prevent possible injury to personnel.
USING TRANSMISSION JACK, ROLL TRANSMISSION (1) INTO PLACE UNDER VEHICLE.
C A U T I O N
Transmission must be seated squarely against flywheel housing to prevent
damage to equipment.
INSTALL TRANSMISSION (1), 12 NEW LOCK WASHERS (2), AND 12 BOLTS (3). HAND-TIGHTEN BOLTS.
TIGHTEN FOUR BOLTS (3) 90 DEGREES APART TO 40 LB-FT (54 N.m).
TIGHTEN 12 BOLTS (3) TO 40 LB-FT (54 N.m).
Step 5 is for all except
M915A2. Step 6 is for M915A2.
INSTALL TWO BOLTS (4), SUPPORT SPRING (5), TWO WASHERS (6), AND TWO NUTS (7).