TM 9-2320-363-34-1
T R A N S M I S S I O N R E P L A C E M E N T ( C O N T )
W A R N I N G
Do not disconnect any air system lines or fittings unless vehicle engine is
shut off and air system pressure is relieved. To do so could result in serious
injury to personnel.
NOTE
Tag all fluid lines, air lines, and electrical connectors prior to removal to aid in
installation.
If transmission is being replaced because of clutch or gear failure, external
filter must be replaced and cooler hoses and cooler must be flushed and blown
out.
Steps 1 thru 6 are for all except M915A2.
1.
FROM INSIDE CAB, THRU ACCESS HOLE, DISCONNECT TWO AIR HOSES (1 AND 2) AND
LUBRICATION HOSE (3).
3-236
Change 1