TM 9-2320-363-34-1
C A U T I O N
Do not allow press support to interfere with oil pump drive gear and shaft
assembly being pressed out. To do so will result in damage to shaft
assembly.
3.
PLACE OIL PUMP BODY (3), PUMP COVER SIDE DOWN, ON PRESS SUPPORT. PRESS
PUMP DRIVE GEAR AND SHAFT ASSEMBLY (6) FROM OIL PUMP DRIVE GEAR (7).
4.
REMOVE OIL PUMP DRIVE GEAR (7) FROM OIL PUMP BODY (3).
OIL
When one or more
NOTE
bushings require replacing, replace all bushings in pump body
and pump cover.
5.
IF BUSHINGS ARE DAMAGED OR WORN, PLACE OIL PUMP BODY (3),
ON PRESS SUPPORT. PRESS BUSHINGS (8) FROM PUMP BODY (3).
PUMP COVER SIDE UP,
3-203