TM 9-2320-363-34-1
NOTE
Position lifter fingers under cross arch of exhaust rocker arm assembly (above
center section of injector rocker assembly). Lifter fingers fit between intake and
injector rockers.
Tag rocker arm assemblies by cylinder location prior to removal to aid in
installation.
3.
USING ROCKER ARM LIFTER (5) ON ROCKER ARM ASSEMBLIES (6) FROM CAM ROLLER SIDE,
LIFT ROCKER ARM ASSEMBLIES AND ROCKER ARM SHAFT (7) FROM CYLINDER HEAD.
4.
SLIDE ROCKER ARM
5.
REMOVE JAM NUTS
(6).
ASSEMBLIES (6) OFF ROCKER ARM SHAFT (7).
(8) AND ADJUSTING SCREWS (9) FROM EACH ROCKER ARM ASSEMBLY
3-185