CAMSHAFT AND BEARINGS REPLACEMENT (CONT)
REMOVE PILOT PULLER SCREW (16). CAMSHAFT GEAR PILOT (13) WILL REMAIN IN
HOLDING CAMSHAFT DRIVE GEAR (9) IN CONTACT WITH ADJUSTABLE IDLER GEAR.
W A R N I N G
Camshaft weighs 53 lb (24 kg). Attach suitable lifting device prior to removal
to prevent possible injury to personnel.
C A U T I ON
Due to size and bulk of camshaft, care must be taken and two persons
should be used to lift camshaft. Use non-metallic sling positioned inboard of
camshaft bearings No. 1 and No. 7 to prevent damage to equipment.
17. USING SLINGS, SLIDE CAMSHAFT (27) TOWARD REAR TO DISENGAGE DOWEL (28) FROM
CAMSHAFT DRIVE GEAR HUB (29). REMOVE CAMSHAFT (27).