TM 9-2320-363-34-1
CYLINDER HEAD REPLACEMENT (CONT)
W A R N I NG
Cylinder head weighs 421 lb (191 kg). Use suitable lifting device to lift and
support cylinder head. Failure to do so could result in injury to personnel.
Make sure lifting device is securely fastened and weight being lifted does
not exceed capacity of lifting device. Failure to do so may cause personal
injury.
8.
ATTACH SUITABLE LIFTING DEVICE TO LIFTER EYE (19) AND REMOVE CYLINDER HEAD (3).
9.
REMOVE AND DISCARD CYLINDER HEAD GASKET (20).
10. REMOVE THREE BOLTS (21) AND LEFT REAR LIFTER BRACKET (22).
C A U T I O N
Tag elbows prior to removal to aid in installation. Failure to do so could
result in damage to equipment.
11. REMOVE TWO ELBOWS (23 AND 24) FROM CYLINDER HEAD (3).
12. REMOVE AIR COMPRESSOR FITTING (25) FROM CYLINDER HEAD (3).
Use general cleaning methods to clean all parts (page 2-30).
3-84