Table 2-2. Unit Preventive Maintenance Checks and Services (PMCS)
for the M915 Family of Vehicles (Cont).
Item to Check/
Not Fully Mission
Replace reservoir oil filter element
Replace filter element inside
reservoir (page 4-762).
Install drain plug (55) in winch
reservoir. Install drain plug (40) in
Fill reservoir with OE/HDO or OEA
(Item 16 or 22, Appendix C) through
filler cap (57) opening until level is
visible in top sight indicator (56).
Approximate capacity is 42 gal (159
I). Install filler cap.
Fill drum (38) with gear lubricating oil
(Item 19, 20, or 21, Appendix C)
through filler plug (39) opening.
Approximate capacity is 5 qt (4.7 I).
Level should be even with bottom of
filler plug opening. Install filler plug.
Remove plugs (46) and drain fluid
while assemblies are still warm from
operation. Check magnetic drain
plugs for excessive metal particle
buildup. Notify Direct Support
Maintenance if this condition exists.
Change 3 2-18.29