Table 2-2. Unit Preventive Maintenance Checks and Services (PMCS) for the M915 Family of Vehicles (Cont).
Item to Check/
Not Fully Mission
Dry cleaning solvent, P-D-680, is toxic
and flammable. Always wear
protective goggles and gloves, and
use only In a well-ventilate d area.
Avoid contact with skin, eyes, and
clothes, and DO NOT breathe vapors.
DO NOT use near open flame or
excessive heat. The solvent's flash
point is 100°F-138°F (38°C-59°C). If
you become dizzy while using cleaning
solvent, immediately get fresh air and
medical help. If solvent contacts eyes,
immediately wash your eyes and seek
Transfer Case ,
Remove breather (35) from transfer
case. Clean with dry cleaning solvent
(Item 25, Appendix C) and allow to
air dry. Install breather in transfer
case (page 4-384).
Inspect transfer case for loose or
damaged bolts. Tighten any loose
bolts. Check for signs of leakage
from oil seals. Notify Direct Support
Maintenance if damage or leaks are
2-18.18 Change 3