Table 2-2. Unit Preventive Maintenance Checks and Services (PMCS)
for the M915 Family of Vehicles (Cont).
Item to Check/
Not Fully Mission
Check output shaft seal for damage
Check transmission shift cable for
kinks, wear, or damage.
When lubricating front axle steering
components, vehicle must be raised to
take weight off the suspension to
permit lubrication to reach all axle
(M915A2). Apply grease (Item 14,
Appendix C) to grease fittings (15) at
top and bottom of steering knuckle
(17) until old lubricant is purged and
fresh grease comes out areas
Indicated by arrows (16). Perform
service at both axle ends.
Change 3 2-18.11