TM 9-2320-363-20-1
Section 4
TROUBLESHOOTING CHARTS
D. CHART 20 ENGINE CRANKS BUT WILL NOT START (Contd.)
STEP/SEQUENCE
C2-9 Check SRS/TRS
Mounting Bracket
l Inspect SRS/TRS mounting
C2-11 Check ECM
Connectors
l Turn ignition off.
l Disconnect all connectors at the
ECM.
l Check terminals at all ECM
connectors (both the ECM and
harness side) for damage; bent,
corroded and unseated pins or
sockets.
WHAT TO DO NEXT
Tighten bolt (or replace if
necessary), page 4-326. Then
go to C2-30.
Contact Direct Support.
Replace ECM, page 4-192.
Then go to C2-30.
Repair terminals/connectors.
Then go to C2-30.
3-145