TM 9-2320-363-10
2-4.
CAB FLOOR-MOUNTED CONTROLS (Cont).
Key
Control or Indicator
Function
4
Transfer Case
Shifts transfer case between LOW and HIGH
Selector Lever (All
range. Lever is normally left in HIGH. If left in
Except M915A2)
Neutral (N) position, truck will not move. Truck must
be completely stopped, with transmission in Neutral
(N), before transfer case shifting is possible.
Shifting selector lever to LOW also engages all-
wheel drive.
5
Hydraulic Control
Controls raising and lowering of dump body (TM 5-
Lever (M917A1 and
3805-264-14&P).
M917A1 w/MCS)
6
MCS Control Unit
Controls operation of MCS tailgate (TM 5-3805-
(M917A1 w/MCS)
264-14&P).
2-23