3-10. FRONT WHEEL AND TIRE ASSEMBLY REPLACEMENT
(M917A1 AND M917A1 W/MCS).
Remove Front Wheel and Tire Assembly.
When changing tires, do not substitute type or tire
size unless all tires can be converted.
Spare wheel and tire assembly is for front axle only.
Stop engine (paragraph 2-20) and drain vehicle air system
Position jack (1) so jack ram (3) is under front steering axle
Always wear eye protection when disconnecting CTIS
air lines. Residual air in tire(s) and air line(s) will be
expelled even though tire(s) is flat. Failure to follow this
warning could cause serious eye injury.
Disconnect hose (6) from elbow (5).
Disconnect connector (7) from wheel valve (8).
Remove elbow (5) from hub air port (4).
Remove spare wheel and tire from carrier (paragraph 3-8).