If engine is not running, ignition switch must be in ON
position for lights to operate.
Operate Beacon Warning Light.
Move beacon light switch up to turn on beacon warning light
(1). BCN LT indicator (4) should come on.
Move beacon light switch down to turn off beacon warning
Operate Work Lights.
Connect work light plug into receptacle (3).
Place ignition key in ON position and main light switch in
STOP LIGHT or SER DRIVE position.
Position ignition key in OFF position and disconnect work
light plug from receptacle (3).
Operate Utility Lights (All Except M917A1 and M917A1 w/MCS).
Place ignition key in ON position and move utility light switch
up to turn utility lights (2) on. UTLY light indicator (5) should come on.
Move utility light switch down and place ignition key in OFF