These vehicles have been designed to operate safely
and efficiently within the limits specified in this TM.
Operation beyond these limits is prohibited in accor-
dance with AR 70-1 without written approval from: Com-
mander, U.S. Army Tank-automotive and Armaments
Command, ATTN:AMSTA-DSA-CS, Warren, Ml 48397-
For operation of the M917A1 and M917A1 w/MCS dump
truck body, refer to TM 5-3805-264-14&P.
This section contains instructions for safely operating the M915 Family of
Vehicles under usual conditions. Unusual conditions are defined and described in
Section IV of this chapter.
2-13. INITIAL ADJUSTMENTS, DAILY CHECKS, AND SELF-
Perform Before operation Preventive Maintenance Checks and Ser-
vices (PMCS) (Chapter 2, Section II).
Change military load classification (paragraph 1-12), if necessary.
Adjust side mirrors (3) by loosening two nuts (2) and moving side
mirror to proper position. Tighten two nuts.
DO NOT attempt to adjust spotter mirrors without loos-
ening screws. Attaching screw may become loose and
result in loss of spotter mirror.
Adjust spotter mirrors (1) by loosening three screws (4) and moving
spotter mirror to proper position. Tighten three screws.