Table 2-1. Preventive Maintenance Checks and Services (PMCS)
for M915 Family of Vehicles (Con't).
Not Fully Mission
Dry cleaning solvent, P-D-680, is toxic and
flammable. Always wear protective goggles
and gloves, and use only in a well-ventilated
area. Avoid contact with skin, eyes, and
clothes, and DO NOT breathe vapors. DO
NOT use near open flame or excessive heat.
The solvents flash point is 100°F-138°F
(38°C-59°C). if you become dizzy while using
cleaning solvent, immediately get fresh air
and medical help. if solvent contacts eyes,
immediately wash your eyes and get medi-
Perform the following service at all axles
except the M915A2 front axle.
Without removing breather
vent (70), check for a clogged
vent. Clean with dry cleaning
solvent (Item 17, Appendix D)
as required to remove dirt and