Table 2-1. Preventive Maintenance Checks and
Services (PMCS) for M915A4 (Con't).
Not Fully Mission
Dry cleaning solvent is toxic and flammable.
Always wear protective goggles and gloves,
and use only in a well-ventilated area. Avoid
contact with skin, eyes, and clothes, and DO
NOT breathe vapors. DO NOT use near open
flame or excessive heat. The solvent's flash
point is 100°F-138°F (38°C-59°C). If you
become dizzy while using cleaning solvent,
immediately get fresh air and medical help. If
solvent contacts eyes, immediately wash your
eyes and get medical aid.
Perform the following service at all axles
except the front axle.
breather vent (61), check
for a clogged vent. Clean
with dry cleaning solvent
(Item 16, Appendix D) as
required to remove dirt