TM 9-2320-303-10
2-24.
OPERATE LIGHTS (Con't).
b.
Operate Work Lights.
(1)
Connect work light plug into receptacle (3) on either side of cab.
(2)
Place ignition key in ON position and main light switch in STOP LIGHT or
SER DRIVE position.
(3)
Position ignition key in OFF position and disconnect work light plug from
receptacle (3).
c.
Operate Utility Lights.
(1)
Place ignition key in ON position and main light switch in STOP LIGHT or
SER DRIVE position.
(2)
Move utility light switch up to turn utility lights turn utility lights (2) on.
UTLY light indicator (5) should come on.
(3)
Move utility light switch down. UTLY light indicator (5) should go off.
Place ignition key in OFF position.
(4)
Place ignition key in OFF position.
2-80