TM 9-2320-302-34
0010 00-29
POWER PACK REPLACEMENT - CONTINUED
0010 00
INSTALLATION - CONTINUED
43.
Connect electronic control module harness connectors (32 and 33) to connectors located at rear of ECM (34).
44.
Install wire (30), washer (29), and nut (28) on fuel pressure sending unit (31).
45.
Install bracket (24) on cable harness (27). Install spacer (25), bracket, and screw (23) in engine block (26). Install new
tiedown straps as required to secure harness (35).
27
33
34
32
35
31
26
28, 29
30
23
24
25