AIR CONDITIONER CONDENSER REPLACEMENT - CONTINUED
REMOVAL - CONTINUED
Tag and disconnect refrigerant lines (1) from condenser (2). Install plugs in refrigerant and condenser lines. Remove and
discard preformed packings.
Remove fasteners attaching condenser (2) to radiator.
Position condenser (2) on radiator and install fasteners.
Remove plugs from refrigerant lines (1) and line ports on new condenser (2).
Install new preformed packings and apply refrigerant oil to preformed packings.
Apply loctite to male fitting threads and connect but do not tighten refrigerant lines (1) to condenser (2).
DO NOT connect refrigerant fittings using only one wrench. Hold one fitting in place using a wrench and
turn other fitting with a second wrench.
Tighten connections in accordance with WP 0123 00.
Any time air conditioning system refrigerant is evacuated, replace receiver-drier.
Replace receiver-drier (WP 0118 00).
Service air conditioner compressor (WP 0116 00).
Charge air conditioning system (WP 0112 00).