CAB DOOR REPLACEMENT - CONTINUED
REMOVAL - CONTINUED
Remove and discard foam tape (5).
Use general cleaning methods to clean all parts.
Ensure that all traces of old foam tape have been removed.
Inspect door seals and window channels for damage.
Inspect door locks, regulators, and release handles for proper operation. If damaged, refer to door repair (WP 0108 00).
Make sure all old foam tape has been removed. Failure to do so could cause water leakage and damage.
Install new foam tape (5) and, using a sharp tool, cut holes for installation of capscrews (3).
Due to size of door and angle for installation, use minimum of two personnel to install door. Failure to do so
could result in injury to personnel.
Position door (4) and install two capscrews (3) in locations indicated.