TM 9-2320-302-34
0096 00-2
CROSSMEMBER REPLACEMENT - CONTINUED
0096 00
REMOVAL
1.
Remove four lock nuts (1) and clamps (2) and set wiring harness (3) aside. Discard lock nuts.
NOTE
Vehicle may utilize huckbolts instead of screws and lock nuts. Replace all loose or damaged huckbolts with
grade 8 screws and lock nuts.
2.
Remove eight lock nuts (4), four washers (5), towing bracket (6), four screws (7), four washers (8), and reinforcement
assembly (9). Discard lock nuts.
3.
Remove five lock nuts (10), washers (11), screws (12), washers (13), two spacers (14), and left side gusset (15). Discard
lock nuts.
4.
Repeat step 3 for right side gusset (16).
WARNING
Plate weighs 96 lb (44 kg). Use hoist with lifting capacity of 200 lb (91 kg) to remove plate. Failure to do so
could result in injury to personnel.
5.
Attach hoist and remove 12 lock nuts (17), washers (18), screws (19), washers (20), and plate (21). Discard lock nuts.
3
1,2
9
6
4,5
7,8
4,5
7,8