TM 9-2320-302-34
0089 00-12
STEERING GEAR REPAIR - CONTINUED
0089 00
ASSEMBLY - CONTINUED
8.
Apply a light coat of lubricating oil to thrust bearing (37) and washer (36). Install thrust bearing and washer on input
shaft (2).
9.
Install input shaft (2) in valve housing (20).
10.
Apply a light coat of grease to thrust bearing (37) and washer (36). Install thrust bearing and washer.
11.
Install new packing (39) and new seal ring (38) in adjuster (33).
12.
Using spanner wrench (35), install adjuster (33) in valve housing (20). Tighten adjuster to 132-180 lb-in (14.9-20.3
Nm), to seat components, then back off 1/4 to 1/2 turn.
36
37
2
20
37
36
38
39
33