TM 9-2320-302-34
0089 00-6
STEERING GEAR REPAIR - CONTINUED
0089 00
DISASSEMBLY - CONTINUED
CAUTION
Position rack piston so that return cap faces up during removal. Failure to do so could result in loss of one or
more balls of 32 ball set. If any balls are lost or damaged, balls must be replaced as a set.
18.
Using torx socket, remove two screws (25), return cap (26), and seal (27) from rack piston (22). Discard screws and seal.
19.
Remove two guide halves (28) and 32 balls (29) by rotating input shaft (2). Discard guide halves.
20.
Remove rack piston (22) from valve housing (20) and input shaft (2).
22
26
27
25
2
28
29
20
22