TM 9-2320-302-34
0084 00-13
AIR COMPRESSOR REPAIR - CONTINUED
0084 00
ASSEMBLY - CONTINUED
CAUTION
Connecting rod bearing insert tangs should be on same side of connecting rod and connecting rod cap to pre-
vent damage to equipment. Ensure connecting rod is fully seated on crankshaft journal to prevent damage to
equipment.
29.
Position connecting rod cap (37) on connecting rod so that wide ear on connecting rod cap matches corresponding ear
on connecting rod.
30.
Install two connecting rod bolts (36) and tighten to 80-100 lb-in (9-11 Nm).
31.
Position new gasket (33) and crankcase cover (32) on bottom of air compressor (6) body.
32.
Install six bolts (31) and tighten to 175-228 lb-in (20-25 Nm).
6
35
34
38
37
36
33
32
31