TM 9-2320-302-34
0082 00-18
REAR-REAR AXLE DIFFERENTIAL CARRIER REPAIR - CONTINUED
0082 00
ASSEMBLY - CONTINUED
34.
Install two bearing cups (11).
35.
Using suitable lifting device, install ring gear subassembly (10) in differential carrier (1).
36.
Install two bearing caps (4 and 5), four cap screws (7), and washers (8).
NOTE
If there is a problem performing step 37, tighten four cap screws to 10-20 lb-ft (14-27 Nm).
37.
Install two adjusting rings (9) in differential carrier (1).
38.
Tighten four cap screws (7) to 347-431 lb-ft (471-584 Nm).
39.
Install dial indicator on flange of differential carrier (1) with plunger against back surface of ring gear (2).
11
11
10
1
5
2
1
7,8
4
9