FORWARD-REAR AXLE DIFFERENTIAL CARRIER REPAIR - CONTINUED
ASSEMBLY - CONTINUED
Install two bearing cones (52).
Adhesives and sealing compounds can burn easily, can give off harmful vapors, and are harmful to skin and
clothing. To avoid injury or death, keep away from open fire and use in well-ventilated area. If adhesive or
sealing compound gets on skin or clothing, wash immediately with soap and water.
Ensure all old adhesive has been removed from differential carrier and bearing caps to prevent damage to
Set two bearing caps (44 and 45) on differential carrier (1) and apply a continuous bead of adhesive around entire
smooth ground surfaces on both sides. Do not apply adhesive to threaded areas.
Remove two bearing caps (44 and 45).