FORWARD-REAR AXLE DIFFERENTIAL CARRIER REPLACEMENT - CONTINUED
If removed, install new oil filter adapter (8).
Forward-rear axle differential carrier weighs 1160 lb (527 kg). Support with suitable floor jack prior to
installation to prevent possible injury to personnel.
Ensure both mating surfaces have been completely cleaned to prevent damage to equipment.
Position differential carrier (6) on floor jack and roll differential carrier into position under vehicle.
Adhesives and sealing compounds can burn easily, can give off harmful vapors, and are harmful to skin and
clothing. To avoid injury or death, keep away from open fire and use in well-ventilated area. If adhesive or
sealing compound gets on skin or clothing, wash immediately with soap and water.
Apply sealing compound around mating surface of axle (7).
Attach suitable hoist and install differential carrier (6) with two washers (5) and nuts (4).
Install ten washers (3) and cap screws (2). Tighten cap screws and two nuts (4) to 150-230 lb-ft (203-312 Nm).
Connect air line (1).
Install axle oil filter (TM 9-2320-302-20).
Connect drivelines (TM 9-2320-302-20).
Install axle shafts (TM 9-2320-302-20).
Fill axle with oil (TM 9-2320-302-20).
END OF WORK PACKAGE