TM 9-2320-302-34
0039 00-9
ACCESSORY DRIVE REPAIR - CONTINUED
0039 00
ASSEMBLY - CONTINUED
NOTE
Support opposite end of accessory drive shaft on press bed when pressing gear on shaft.
9.
Place accessory drive gear (7) on accessory drive shaft (9) with chamfered end of bore toward accessory drive shaft.
Using press, install accessory drive gear until accessory drive gear is flush with end of accessory drive shaft. Obtain
minimum press load of 4000 lb (17.8 kN).
10.
Install service kit holding fixture (3) and three fixture screws (2) on accessory drive gear (7).
11.
Install service kit holding fixture (3) in vise.
7
9
2
3